Semi-Automatic Pneumatic Crown Capper by Tenco
The "StarCap" Crown Capper by Tenco is a fully air-operated & innovative capper that installs Crown Caps, Bartops/T-Corks, Plastic Caps and Champagne Stoppers. This is solid, well built, compact and easy to use machine for perfect capping of bottles using Crown Caps, Bar-Tops/T-Corks and plastic snap-on caps. Crown Caps are attached to capper magnetized head or Bartops or plastic caps are pressed on after placing on top of bottle and is a great addition to any small brewery, cidery or distillery looking to automate. When both start-buttons are switched on, the Bar-top or cap is placed into the bottle by compression, ensuring cork/cap integrity. The special capping head design for Bartops ensures perfect capping without damages to the surface. The StarCap Crown Capper is equipped with a condensation collection and dump unit, air pressure adjuster to regulate the pressure depending on the type of cork or cap employed. Requires an air compressor (not included) with an output of 60 - 90 PSI.
DETAILS
The "StarCap" Crown Capper by Tenco is a fully air-operated & innovative capper that installs Crown Caps, Bartops/T-Corks, Plastic Caps and Champagne Stoppers. This is solid, well built, compact and easy to use machine for perfect capping of bottles using Crown Caps, Bar-Tops/T-Corks and plastic snap-on caps. Crown Caps are attached to capper magnetized head or Bartops or plastic caps are pressed on after placing on top of bottle and is a great addition to any small brewery, cidery or distillery looking to automate. When both start-buttons are switched on, the Bar-top or cap is placed into the bottle by compression, ensuring cork/cap integrity. The special capping head design for Bartops ensures perfect capping without damages to the surface. The StarCap Crown Capper is equipped with a condensation collection and dump unit, air pressure adjuster to regulate the pressure depending on the type of cork or cap employed. Requires an air compressor (not included) with an output of 60 - 90 PSI.
DETAILS
- Can cap or cork or cap up to 400 bottles per hour
- Accommodates Crown Caps, Bartops, T-Corks, Plastic Caps. (We recommend non-magnetic head for Bartops)
- Crown Caps between 26 - 29mm in diameter
- Plastic Snap On Caps up to 25mm in diameter & 45mm deep (using different head included with this corker/capper)
- Champagen Stoppers - PLASTIC ONLY
- Bottle height from 5.1 - 18.5 in (130 - 465mm)
- Fully Pneumatic
- Caps or Bartops individually loaded into special-design head
- High Quality air-operated components do not reequire lubrication
- Weight: 45 lbs
- Operates on 60 - 90 PSI (Air Compressor not included)
- For continuous operation a compressor rated at 6.0SCFM is required. Most people do not operate continuously and can use a smaller compressor.
- Comes with "Push to Connect L" Fitting that accepts 5/16-inch OD hose or remove to replace with 1/4-inch MPT Fitting of your choosing
- Made in Italy
CUSTOMER PICK-UP OR TRUCK SHIPMENT ONLY! - We will call with actual shipping costs prior to shipping or charging your credit card
WINEMAKERS DEPOT - Your Trusted Source for Bottling Equipment
WINEMAKERS DEPOT - Your Trusted Source for Bottling Equipment
TMV Semi-Automatic Corker with Vacuum & Nitrogen Injection (800 bottles/hr)
ACZ-TMV
Price
$11,500.00
