The "StarCap" Semi-Automatic Bottle Corker by Tenco is an air-operated & innovative bottle corker that with a different head (included) can also install Bartops/T-Corks, Crown Caps, Plastic Caps and Champagne Stoppers. This is solid, well built, compact and easy to use machine for perfect corking and capping of bottles using corks, bar-tops, crown caps, and plastic snap-on caps and a great addition to any small winery looking to automate. Corks are manually put into the loading cone. When both start-buttons are switched on, the cork is placed into the bottle by compression, ensuring cork integrity. The special capping head design ensures perfect corking without damages to the cork surface. The StarCap is equipped with a condensation collection and dump unit, air pressure adjuster to regulate the pressure depending on the type of cork or cap employed. Requires an air compressor (not included) with an output of 60 - 90 PSI.
DETAILS
CUSTOMER PICK-UP OR TRUCK SHIPMENT ONLY! - We will call with actual shipping costs prior to shipping or charging your credit card
WINEMAKERS DEPOT
Your Trusted Source for Winery and Professional Supplies & Equipment
****THIS IS A SPECIAL BUY - A WINEMAKERS DEPOT EXCLUSIVE PURCHASE - THIS IS NOT A CLOSE OUT OR DISCONTINUED ITEM****
DETAILS
- Can cork or cap up to 400 bottles per hour
- Accommodates Natural, Agglomerated, & Synthetic Corks, sizes #7, #8, #9, & #10
- Bartop or T-Corks (using different head included with this corker/capper)
- Crown Caps between 26 - 29mm in diameter (using different head included with this corker/capper)
- Plastic Snap On Caps up to 25mm in diameter & 45mm deep (using different head included with this corker/capper)
- Champagne Stoppers - PLASTIC ONLY
- For installation Crown Caps, T-Corks and Plastic Snap on Caps, included with this unit is an easy to change/swap out head for their application
- Bottle height from 5.1 - 18.5 in (130 - 465mm)
- Fully Pneumatic
- Corks and Caps individually loaded into special-design head
- High Quality air-operated components do not reequire lubrication
- Operates on 60 - 90 PSI (Air Compressor not included)
- For continuous operation a compressor rated at 6.0 SCFM is required. Most people do not operate continuously and can operate with a much smaller compressor.
- Has a Cone for Cork Compression rather than an Iris - This will cause some compression to your cork which will vary depending on cork size and specifications
- Comes with "Push to Connect L" Fitting that accepts 5/16-inch OD hose or remove to replace with 1/4-inch MPT Fitting of your choosing
- Made in Italy
WINEMAKERS DEPOT
Your Trusted Source for Winery and Professional Supplies & Equipment
