The NEW MIX Tank Agitator by Zambelli contains a removable shaft and mechanical seal, allowing it to be installed on and removed from full tanks without any loss of material from inside the tank. The agitator attaches to the ball valve on a tanks mixing port. Once it is connected, the valve is opened and the adjustable shaft is slid into place from the back of the agitator. The shaft is equipped with a pivoted blade propeller which remains folded while being inserted into the tank, then expands its blades when the motor is started.
The agitator can be supported manually (by holding it in place) or with one of the Zambelli New Mix Stands that can be adujusted from 24 - 40" (optional).
WINEMAKERS DEPOT
Your Trusted Source for Winery, Cider, Distilling Equipment & Supplies
The agitator can be supported manually (by holding it in place) or with one of the Zambelli New Mix Stands that can be adujusted from 24 - 40" (optional).
DETAILS
- Suitable for tanks up to 10,000 liters
- Can be installed on and removed from tanks containing fluid or empty
- 2.0" Tri-Clamp Connection
- 4-Bolt Pattern: 4" OC (front to back), 5" OC (left to right)
- Requires mixing/agitator port to have Ball Valve with 2.0" TC Connection
- Optional wheeled or fixed stand (24 - 40" H) available
- Motor: 0.75 HP, 220v 1-PH 60Hz, 5A, 920 RPM
- Helical Type: Blade Ø150mm
- Shaft Length: approx. 22 in penetration from face of triclamp to end of agitator
- AISI 304 Stainless Steel construction
- Made in Italy
WINEMAKERS DEPOT
Your Trusted Source for Winery, Cider, Distilling Equipment & Supplies
