Lenticular Filter Housing AISI 316 Stainless Steel

Price: make selection(s)
  • Item #LFH-PV-
- +
Other products by ProValve
Lenticular filter housing standing on 4 legs, closure by stainless steel bolts, sealing by silicone gasket, flat gasket style adapter for modules. Available in 12-Inch and 16-Inch Diameters with capacity for 2, 3 or 4 Modules
Benefits of Lenticular Filter vs Plate & Frame Filter:
  • Easier/Quicker Setup
  • Easier/Quicker to Clean
  • Greatly reduce risk of contamination/oxidation due to sealed system
  • Filtration without product losses due to an enclosed design
  • Simple to load and break down- no need for wetting and re-tightening
  • Housings can be loaded with as few as one filter module (Additional Equipment Required)
  • Filter modules can be back flushed and reused multiple times (When using backflushable modules and applicable hardware)
  • A Lenticular Filter system with re-usable filter media cost less than other types of filters with comparable filtration capacity
  • Takes up less space due to vertical design
  • ***Note - A 12-Inch 3-Module Lenticular Filter has comparable filtertration capacity as a 40-Plate 40x40 Plate & Frame Filter
Specifications & Details:
12-INCH HOUSING FILTRATION SURFACE DIA x HEIGHT WEIGHT
2 Module Lenticular Filter Housing 12” 3.6 sq. meter 15.7” x 48” 165 lb
3 Module Lenticular Filter Housing 12” 5.4 sq. meter 15.7” x 58” 200 lb
4 Module Lenticular Filter Housing 12” 7.2 sq. meter 15.7” x 60” 215 lb
16-INCH HOUSING      
2 Module Lenticular Filter Housing 16” 10.0 sq. meter 17.7” x 48” 220 lb
3 Module Lenticular Filter Housing 16” 15.0 sq. meter 17.7” x 58” 250 lb
4 Module Lenticular Filter Housing 16” 20.0 sq. meter 17.7” x 69” 285 lb








Includes all necessary fittings for filter operation.
  • Inlet/Outlet      1.5” TC
  • Gauge port       1.5” TC
  • Drain outlet      1.0” TC
  • Air vent            0.25” thread to hose barb
Materials:
316 stainless steel, sanitary construction

Surface Finish:
Mirror polished Ra<0.2μ

Includes: (each housing)
  • Pressure Gauge
  • 2 Butterfly valves for inlet/outlet and drain
  • Bottom Deflection Plate required for back wash
  • All clamps and gaskets
Technical data dome:
Maximum operating temperature: 140˚ C (284˚ F)
Maximum operating pressure: 10 bar (liquid pressure only)

Optional items for Lenticular housings (see related items above):
1-High center post for Lenticular filter housing.
Allows the housing to be used with only one filter module in it.
2-High center post for Lenticular filter housing.
Allows the housing to be used with only two filter module in it.
3-High center post for lenticular filter housing.
Allows the housing to be used with only three filter module in it.

CUSTOMER PICK-UP OR TRUCK SHIPMENT ONLY! - We will call with actual shipping costs prior to shipping or charging your credit card.

WINEMAKERS DEPOT
Your Trusted Source for Winery, Cider, Distilling Equipmemt & Supplies